1 Lilemo tse fetang 20 tsa boiphihlelo indastering ea ho futhumatsa e hahang.
Teko ea mahala ea ho khetha mofuta oa mochini pele o reka.
3 Patlisiso ea moralo oa lihlahisoa e nts'etsapele le ho boloka ke sehlopha sa Moenjiniere oa Duolin, ts'ebeletso ea ts'ebeliso ea mochini.
4 Hlahloba mochini ho latela litlhoko tsa ho futhumatsa ha moreki le ho tsofala ho feta lihora tse 6 ho netefatsa boleng bo botle.
5 Fana ka buka ea ho kenya le tharollo ea mathata.
6 Sebelisa likarolo tsa brand tse tsebahalang Infineon Omron Schneider ho netefatsa boleng ba thepa
  • Long bar heat treatment machine

    Mochini o molelele oa kalafo ea mocheso

    Kopo: Ho tsoela pele ho thatafatsa le ho halefa

    Karolo: bareng e telele, khoele e koahetsoeng

    Boholo: 6-100mm

    Bolelele: 1000-14000

    Sehlopha: 8.8, 10.9, 12.9

    Lintho tse bonahalang: k'habone tšepe, motsoako tšepe

  • Induction soldering&welding machine

    Induction soldering & mochini oa ho tjheseletsa

    Matla: 4-1500KW

    Maqhubu a mosebetsi: 0.5-400Khz

    Karolo ea Brazing: Pipe, lehare la sakha, indasteri ea likoloi, male rotor

    Lintho tse bonahalang: Koporo, celik, koporo, aluminium

  • induction hardening machine

    mochini o thatafatsang induction

    DUOLIN e fana ka mochini oa ho thatafatsa o emeng o emeng kapa o tshekaletseng o sebelisetsoang ho thatafatsa likarolo tse fapaneng tsa mochini, joalo ka lithupa, likere, li-roller, lipeipi, pompo e loketseng, ho jara, meno a lintho tse epolotsoeng, jj. eketsa melemo ea hau.

  • Induction forging machine

    Induction betloa ha mochini

    Ho theha Induction thepa

    Tlhahiso ea matla: 100-1500KW

    Maqhubu: 0.5-10Khz

    Bar bophara: 25-200mm

    Sephetho: 0.2-4T / h

    Mocheso: 800-1250 ℃

    Lintho tse bonahalang: K'habone tšepe, koporo, Tšepe, motsoako tšepe, Stainless tšepe, Aluminium

    Kopo: Bar, poleiti e bataletseng, bareng qetellong futhumatsang, bataletseng bareng qetellong, lipeipi lipheletsong, joalo-joalo

  • Induction bending machine

    Induction khumama mochini

    Ho qhekella ho futhumatsa bakeng sa ho koba phala

    Bending phala: bophara 168mm-1100mm, botenya ba lerako 6-80mm

    Tlhahiso ea matla: 100-1500KW

    Ba kobang Type: Pipe, Square tube ,, likhutlo li 'nè tube, Beam

    Lintho tse bonahalang: K'habone tšepe, celik, motsoako tšepe

    Lebelo le kobehang: Hoo e ka bang 2.5 mm ka motsotso

    Khumama angle: 0-180°kapa o behe lehlakore lefe kapa lefe

    Radius e khumameng: 3DR10D

  • Induction Annealing machine

    Mochini oa ho kenyelletsa oa induction

    Ho futhumatsa ho futhumatsa bakeng sa annealing

    Matla: 4-1500KW

    Maqhubu a mosebetsi: 0.5-400Khz

    Karolo ea Anneal: Pitsa, Pan, phala, terata le thapo, Li-fasteners …….

    Lintho tse bonahalang: Koporo, celik, ao cheseletse kopanetsoeng, koporo,